Intel SR2400SYSD2 User Guide - Page 98
Disconnecting the Power Cables from the Server Board, Hot-Swap, SATA Backplane - cpu
UPC - 735858169172
View all Intel SR2400SYSD2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
8. Unplug the main power, power signal and CPU power cables from the server board. The position of your cables may be different. See your server board documentation to locate the connection points. In the diagram below, letter "A" shows the main power cable, letter "B" shows the power signal cable, and letter "C" shows the CPU power cable. B A C Figure 64. Disconnecting the Power Cables from the Server Board 9. (Hot-swap system only): Disconnect the 2x3 power cable from the backplane. See the figure below. For assistance in locating connectors on the SATA or SCSI backplane, see "Hot-Swap SATA Backplane Connections" or "Hot-Swap SCSI Backplane Connections." TP01350 Figure 65. Disconnecting the Power Cable from the Backplane 74
74
8.
Unplug the main power, power signal and CPU power cables from the server board. The
position of your cables may be different. See your server board documentation to locate the
connection points. In the diagram below, letter “A” shows the main power cable, letter “B”
shows the power signal cable, and letter “C” shows the CPU power cable.
C
B
A
Figure 64.
Disconnecting the Power Cables from the Server Board
9.
(Hot-swap system only): Disconnect the 2x3 power cable from the backplane. See the figure
below. For assistance in locating connectors on the SATA or SCSI backplane, see “
Hot-Swap
SATA Backplane
Connections” or “
Hot-Swap SCSI Backplane
Connections.”
TP01350
Figure 65.
Disconnecting the Power Cable from the Backplane