Intel SR2400SYSD2 User Guide - Page 54
Installing the Fan Module, letter C in
UPC - 735858169172
View all Intel SR2400SYSD2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
5. Place the fan module over the chassis standoffs and slide the module to the right until the blue tab clicks into place. See letter "A" in the figure below. 6. Connect the folded fan module ribbon cable to the fan module. See letter "B" in the figure. 7. If it is not already connected, connect the other end of the ribbon cable to the server board. See letter "C" in the figure. B C A Figure 24. Installing the Fan Module TP01081 30
30
5.
Place the fan module over the chassis standoffs and slide the module to the right until the blue
tab clicks into place. See letter “A” in the figure below.
6.
Connect the folded fan module ribbon cable to the fan module. See letter “B” in the figure.
7.
If it is not already connected, connect the other end of the ribbon cable to the server board. See
letter “C” in the figure.
TP01081
A
B
C
Figure 24.
Installing the Fan Module