Intel SR2400SYSD2 User Guide - Page 72
Installing Floppy Drive into Slimline Bay (No Backplane Installed)
UPC - 735858169172
View all Intel SR2400SYSD2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Installing Floppy Drive into Slimline Bay (No Backplane Installed) ✏ NOTE The carrier for the slimline floppy drive that is used in these instructions was sent to you in the hardware kit that came with your Server Chassis SR2400/2400DC. The interposer board and floppy drive power adapter cable used in these instructions was sent to you with your fixed drive kit. 1. Observe the safety and ESD precautions at the beginning of this book. See "Safety Information." 2. Power down the server and unplug all peripheral devices and the AC power cable or DC external source. 3. Remove the chassis cover. For instructions, see "Removing the Chassis Cover." 4. Remove the front bezel if it is installed. For instructions, see "Removing the Front Bezel." 5. Align the two holes at the left side of the floppy drive with the two cutouts in the floppy drive carrier. See letter "A" in the figure below. 6. Lower the right side of the floppy drive into the carrier until it clicks into place. See letter "B" in the figure below. A B TP01082 Figure 42. Installing a Slimline Floppy Drive into the Carrier 48