Intel SR2400SYSD2 User Guide - Page 51

Installing the Fixed Drive Air Baffle (No Backplane Installed),

Get Intel SR2400SYSD2 - Server System - 0 MB RAM PDF manuals and user guides
UPC - 735858169172
View all Intel SR2400SYSD2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

Hardware Installations and Upgrades Installing the Fixed Drive Air Baffle (No Backplane Installed) 1. Observe the safety and ESD precautions at the beginning of this book. See "Safety Information." 2. Power down the server and unplug all peripheral devices and the AC power cable or DC external source. 3. Remove the chassis cover. For instructions, see "Removing the Chassis Cover." 4. Hook the front of the air baffle under the drive bay area at the left of the fan module, engaging the two small hooks at the front of the air baffle. See letter "A" in the figure below. 5. Lower the baffle into the chassis behind the drive bay area, using your notes from the air baffle removal steps to re-route any cables. See letter "B" in the figure below. 6. Line up the guide pin on the chassis floor with the matching hole in the baffle. See letter "C" in the figure. 7. Push down on the baffle to secure it to the chassis. Use caution so you do not pinch any cables under the baffle. 8. Return to the procedure that directed you to install the fixed drive air baffle. C B A TP01368 * Air baffle for AC model shown; air baffle for DC model differs. Figure 21. Installing the Fixed Drive Air Baffle Intel® Server Chassis SR2400/SR2400DC User Guide 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
Hardware Installations and Upgrades
Intel® Server Chassis SR2400/SR2400DC User Guide
27
Installing the Fixed Drive Air Baffle (No Backplane Installed)
1.
Observe the safety and ESD precautions at the beginning of this book. See “
Safety
Information
.”
2.
Power down the server and unplug all peripheral devices and the AC power cable or DC
external source.
3.
Remove the chassis cover. For instructions, see “
Removing the Chassis Cover
.”
4.
Hook the front of the air baffle under the drive bay area at the left of the fan module, engaging
the two small hooks at the front of the air baffle. See letter “A” in the figure below.
5.
Lower the baffle into the chassis behind the drive bay area, using your notes from the air baffle
removal steps to re-route any cables. See letter “B” in the figure below.
6.
Line up the guide pin on the chassis floor with the matching hole in the baffle. See letter “C” in
the figure.
7.
Push down on the baffle to secure it to the chassis. Use caution so you do not pinch any cables
under the baffle.
8.
Return to the procedure that directed you to install the fixed drive air baffle.
B
A
C
TP01368
* Air baffle for AC model shown; air baffle for DC model differs.
Figure 21.
Installing the Fixed Drive Air Baffle