Intel SR2400SYSD2 User Guide - Page 80
Hot-Swap SATA Backplane, Installing the Chassis Cover, Installing the Front Bezel.,
UPC - 735858169172
View all Intel SR2400SYSD2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
14. Slide the carrier assembly into the upper left hard drive bay until it clicks into place. See letter "A" in the figure below. 15. Open the connector labeled "Floppy Con" on the backplane by pulling up on the connector cover. See letter "B" in the figure below. For assistance in locating connectors on the SATA backplane, see "Hot-Swap SATA Backplane Connections." For assistance in locating connectors on the SCSI backplane, see "Hot-Swap SCSI Backplane Connections." 16. Insert the loose end of the flat flex cable into the backplane connector. See letter "C" in the figure. 17. Push in on the connector cover to lock the cable into place. See letter "D" in the figure. D B C A Figure 51. Installing the Floppy Drive into the Chassis TP01310 18. Install the chassis cover. For instructions, see "Installing the Chassis Cover" 19. (Optional) Install the front bezel. For instructions, see "Installing the Front Bezel." 20. Plug in all peripheral devices and connect the AC power cable or DC external source to the server. 56