Intel SR2400SYSD2 User Guide - Page 70
Hot-Swap SATA Backplane, Installing the Chassis Cover., Installing the Front Bezel.,
UPC - 735858169172
View all Intel SR2400SYSD2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Figure 40. Connecting the Flat Flex Cable to a Floppy Drive 10. Slide the floppy drive assembly into the slimline bay of the chassis until it clicks into place. See letter "A" in the figure below. 11. Open the connector labeled "Floppy Con" on the backplane by pulling up on the connector cover. See letter "B" in the figure below. For assistance in locating connectors on the SATA backplane, see "Hot-Swap SATA Backplane Connections." For assistance in locating connectors on the SCSI backplane, see "Hot-Swap SCSI Backplane Connections." 12. Insert the loose end of the floppy cable into the backplane connector. See letter "C" in the figure. 13. Push in on the connector cover to lock the cable into place. See letter "D" in the figure. C D B A Figure 41. Installing the Slimline Floppy Drive into the Chassis 14. Install the chassis cover. For instructions, see "Installing the Chassis Cover." 15. (Optional): Install the front bezel. For instructions, see "Installing the Front Bezel." 16. Plug in all peripheral devices and connect the AC power cable or DC external source to the server. 46