Intel SR2400SYSD2 User Guide - Page 83
Removing a CD-ROM or DVD-ROM Drive from the Slimline Bay (Backplane Installed),
UPC - 735858169172
View all Intel SR2400SYSD2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Hardware Installations and Upgrades 10. Slide the DVD-ROM / CD-ROM drive carrier into the chassis. See letter "A" in the figure below. 11. Connect the loose end of the CD-ROM drive cable to the backplane connector. See letter "B" in the figure. For assistance in locating connectors on the SATA backplane, see "Hot-Swap SATA Backplane Connections." For assistance in locating connectors on the SCSI backplane, see "Hot-Swap SCSI Backplane Connections." A B TP01086 Figure 53. Installing a DVD/CDROM Drive into the Chassis 12. Install the chassis cover. For instructions, see "Installing the Chassis Cover." 13. (Optional) Install the front bezel. For instructions, see "Installing the Front Bezel." 14. Plug in all peripheral devices and connect the AC power cable or DC external source to the server. Removing a CD-ROM or DVD-ROM Drive from the Slimline Bay (Backplane Installed) 1. Observe the safety and ESD precautions at the beginning of this book. See "Safety Information." 2. Power down the server and unplug all peripheral devices and the AC power cable or DC external source. 3. Remove the chassis cover. For instructions, see "Removing the Chassis Cover." 4. Remove the front bezel if it is installed. For instructions, see "Removing the Front Bezel." 5. Disconnect the CD-ROM data cable from the backplane. For assistance in locating connectors on the SATA backplane, see "Hot-Swap SATA Backplane Connections." For assistance in locating connectors on the SCSI backplane, see "Hot-Swap SCSI Backplane Connections." 6. Push in on the blue lever at the rear of the drive carrier. Slide the drive carrier out through the front of the chassis. 7. Press downward on the side of the carrier release the drive from the drive carrier. Intel® Server Chassis SR2400/SR2400DC User Guide 59