Intel SR2400SYSD2 User Guide - Page 75

Removing the Fixed Drive Air Baffle No Backplane Installed,

Get Intel SR2400SYSD2 - Server System - 0 MB RAM PDF manuals and user guides
UPC - 735858169172
View all Intel SR2400SYSD2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 75 highlights

Hardware Installations and Upgrades 15. Slide the floppy drive assembly into the chassis until it clicks into place. See letter "A" in the figure below. 16. Connect the 2x2 end of the floppy drive power cable that was included with your kit to the 2x2 power connector on the SATA power adapter cable. See letters "B" and "C" in the figure below. 17. Connect the remaining end of the floppy drive power cable to the power connector on the rear of the floppy drive. See letter "D" in the figure. 18. Connect the floppy drive data cable that was included with your kit between the floppy drive data connector and the server board. See letters "E" and "F" in the figure. See your server board documentation for assistance in locating the connector location on the server board. 19. Route the floppy drive data cable underneath the air baffle, as shown in the diagram below. You may need to remove the air baffle to route the data cable. For instructions on removing and installing the air baffle, see "Removing the Fixed Drive Air Baffle (No Backplane Installed)" and "Installing the Fixed Drive Air Baffle (No Backplane Installed)." F A C B E DE D F B C Figure 45. Connecting the Floppy Drive Cables TP01165 Intel® Server Chassis SR2400/SR2400DC User Guide 51

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
Hardware Installations and Upgrades
Intel® Server Chassis SR2400/SR2400DC User Guide
51
15. Slide the floppy drive assembly into the chassis until it clicks into place. See letter “A” in the
figure below.
16. Connect the 2x2 end of the floppy drive power cable that was included with your kit to the 2x2
power connector on the SATA power adapter cable. See letters “B” and “C” in the figure
below.
17.
Connect the remaining end of the floppy drive power cable to the power connector on the rear
of the floppy drive. See letter “D” in the figure.
18. Connect the floppy drive data cable that was included with your kit between the floppy drive
data connector and the server board. See letters “E” and “F” in the figure. See your server board
documentation for assistance in locating the connector location on the server board.
19. Route the floppy drive data cable underneath the air baffle, as shown in the diagram below.
You may need to remove the air baffle to route the data cable. For instructions on removing and
installing the air baffle, see “
Removing the Fixed Drive Air Baffle (No Backplane Installed)
”
and “
Installing the Fixed Drive Air Baffle (No Backplane Installed)
.”
TP01165
B
C
D
A
E
F
E
F
D
B
C
Figure 45.
Connecting the Floppy Drive Cables