Intel SR2400SYSD2 User Guide - Page 48

Removing the Small Hot-swap Air Baffle (Backplane Installed), Removing the Large Hot-swap Air Baffle

Get Intel SR2400SYSD2 - Server System - 0 MB RAM PDF manuals and user guides
UPC - 735858169172
View all Intel SR2400SYSD2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

Removing the Small Hot-swap Air Baffle (Backplane Installed) 1. Observe the safety and ESD precautions at the beginning of this book. See "Safety Information." 2. Power down the server and unplug all peripheral devices and the AC power cable or DC external source. 3. Remove the chassis cover. For instructions, see "Removing the Chassis Cover." 4. Remove the large air baffle. For instructions, see "Removing the Large Hot-swap Air Baffle (Backplane Installed)." 5. Remove the fan module. For instructions, see "Removing the Fan Module." 6. Remove the SATA or SCSI backplane. For instructions, see "Removing a SATA or SCSI Backplane." 7. Important: Note how cables are routed around and under the air baffle. You will need to re- route these cables when you reinstall the air baffle. 8. Pull up on the air baffle to remove it, disengaging the hooks that attach the baffle at the rear of the drive bay area. See letter "A" in the figure below. You may need to remove or hold cables out of the way. 9. Return to the procedure that directed you to remove the small air baffle. TP01348 Figure 18. Removing the Small Hot-swap Air Baffle 24

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
24
Removing the Small Hot-swap Air Baffle (Backplane Installed)
1.
Observe the safety and ESD precautions at the beginning of this book. See “
Safety
Information
.”
2.
Power down the server and unplug all peripheral devices and the AC power cable or DC
external source.
3.
Remove the chassis cover. For instructions, see “
Removing the Chassis Cover
.”
4.
Remove the large air baffle. For instructions, see “
Removing the Large Hot-swap Air Baffle
(Backplane Installed)
.”
5.
Remove the fan module. For instructions, see “
Removing the Fan Module
.”
6.
Remove the SATA or SCSI backplane. For instructions, see “
Removing a SATA or SCSI
Backplane
.”
7.
Important:
Note how cables are routed around and under the air baffle. You will need to re-
route these cables when you reinstall the air baffle.
8.
Pull up on the air baffle to remove it, disengaging the hooks that attach the baffle at the rear of
the drive bay area. See letter “A” in the figure below. You may need to remove or hold cables
out of the way.
9.
Return to the procedure that directed you to remove the small air baffle.
TP01348
Figure 18.
Removing the Small Hot-swap Air Baffle