Intel SR2400SYSD2 User Guide - Page 94
Removing the Control Panel from the Chassis
UPC - 735858169172
View all Intel SR2400SYSD2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
7. Disconnect the front panel cable and the USB cable from the front panel control board at the rear of the control panel. See letters "C" and "D" in the figure. ✏ NOTE The cables at the rear of the control panel are positioned differently for the Intel® Local Control Panel and the Standard Control Panel. In the Local Control Panel, the USB cable (letter "D" in the figure below) is perpendicular to the front panel cable (letter "C" in the figure below), instead of parallel to it. Note the positions as you remove the cables from the control panel. C D A B B TP01297 Figure 61. Removing the Control Panel from the Chassis 8. Connect the front panel cable and the USB cable to the replacement control panel. 9. Slide the replacement control panel into the chassis until it clicks into place. 10. If you needed to disconnect the front panel or USB cable from the server board or from a backplane board, reconnect the cable(s). 11. Install the chassis cover. For instructions, see "Installing the Chassis Cover." 12. (Optional) Install the front bezel. For instructions, see "Installing the Front Bezel." 13. Plug in all peripheral devices and connect the AC power cable or DC external source to the server. 70