Kyocera FS-4200DN FS-2100DN/4100DN/4200DN/4300DN Operation Guide - Page 170

Operation Panel SecurityPassword (Change the Security Password) Change the Security Password. New Password: a b * S 1 In the SSD Initializ. menu, press  or  to select Security Passwd. 2 Press [OK]. The New Password entry screen appears. ABC [ Text ] Confirm Password: a b * S ABC [ Text ] 3 Enter the new Security Password using the numeric keys. Note The Security Password must be between 6 and 16 characters. For details on entering characters, refer to Character Entry Method on page A-2. 4 Press [OK]. The Confirm Password entry screen appears. 5 To confirm, re-enter the security password to be registered. Enter the new Security Password using the numeric keys. 6 Press [OK]. If the Security Password entered matches then the password is changed to the new password and the SSD Initializ. menu reappears. If the password does not match, Incorrect password is displayed and the New Password entry screen reappears. Enter again from the new Security Password. Initialization (Initialize on optional SSD) Overwrite all the data stored in the optional SSD (HD-6) when disposing of the printer. IMPORTANT If you accidentally turn the power switch off during initialization, the HD-6 might possibly crash or initialization might fail. 1 In the SSD Initializ. menu, press  or  to select Initialization. 2 Press [OK]. A confirmation message is displayed. System Initialization will start. Are you sure? 3 Press [Yes] ([Left Select]). The printer automatically restarts and then initialization starts. If you do not wish to initialize, press [No] ([Right Select]). The SSD Initializ. menu reappears. [ Yes ] [ No ] 4-108