Kyocera FS-4200DN FS-2100DN/4100DN/4200DN/4300DN Operation Guide - Page 292
Special Paper, Transparency
View all Kyocera FS-4200DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 292 highlights
Appendix Special Paper The following types of special paper can be used: Paper Type to be Used Overhead projector transparencies Rough paper Thin paper (60 to 64 g/m²) Label Recycled paper Preprinted paper Bond paper Postcards Colored paper Prepunched paper Letterhead Envelopes Thick paper (120 to 220 g/m²) High-quality paper Custom Paper Type to be Selected Transparency Rough Vellum Labels Recycled Preprinted Bond Cardstock Color Prepunched Letterhead Envelope Thick High Quality Custom 1~8 Use paper that is sold specifically for use with copiers or printers (heat-fusing type). When using transparencies, labels, thin paper, postcards, or thick paper, feed the paper from the MP tray. For details, refer to Cassette (1 to 5) Type (Setting the cassette paper type) on page 4-32. Since the composition and quality of special paper vary considerably, special paper is more likely than white bond paper to give trouble during printing. No liability will be assumed if moisture and so forth given off during printing on special paper causes harm to the machine or operator. Note Before purchasing any type of special paper, test a sample on the machine and check that printing quality is satisfactory. Transparency Transparencies must be able to withstand the heat of fusing during the printing process. The recommended transparency product is 3M CG3700 (Letter, A4). The table below lists the specifications for transparency: Item Tolerance of heat Thickness Material Dimensional accuracy Squareness of corners Specification Must tolerate at least 190 °C (374 °F) 0.100 to 0.110 mm (3.9 to 4.3 mils) Polyester ±0.7 mm (±0.0276 inches) 90° ±0.2° A-18