Kyocera FS-4200DN FS-2100DN/4100DN/4200DN/4300DN Operation Guide - Page 51
Loading Envelopes, Switching to Envelop Mode FS-2100D/FS-2100DN
View all Kyocera FS-4200DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Preparation before Use Loading Envelopes 5 envelopes may be loaded in the multi purpose tray. Acceptable envelope sizes are as follows. Acceptable Envelope Youkei 2 Youkei 4 Monarch Envelope #10 (Commercial #10) Envelope DL Envelope C5 Executive Envelope #9 (Commercial #9) Envelope #6 (Commercial #6 3/4) Size 114 × 162 (mm) 105 × 235 (mm) 3 7/8" × 7 1/2" 4 1/8" × 9 1/2" 110 × 220 (mm) 162 × 229 (mm) 7 1/4" × 10 1/2" 3 7/8" × 8 7/8" 3 5/8" × 6 1/2" Switching to Envelop Mode (FS-2100D/FS-2100DN) To print on an envelope, follow the procedure below to switch to envelope mode. Note When the printing on envelopes is completed, return the envelope switch to its original position (at the bottom). 1 Open the rear cover. 2 To print on an envelope, raise the envelope switch. CAUTION The fuser unit inside the printer is hot. Do not touch it with your hands as it may result in burn injury. Envelope Switch 2-27