Netgear GS752TP GS728TP/GS728TPP/GS752TP Software Administration Manual - Page 165
TACACS+ Server Configuration, APPLY, To con TACACS+ server settings, Security
View all Netgear GS752TP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches 3. In the Connection Timeout field, specify the maximum number of seconds allowed to establish a TCP connection between the switch and the TACACS+ server. The valid range is 1-30 seconds. The default is 5 seconds. 4. Click APPLY to update the switch with the TACACS+ Accounting server settings. TACACS+ Server Configuration Use the TACACS+ Server Configuration screen to configure up to five TACACS+ servers with which the switch can communicate. To configure TACACS+ server settings: 1. Select Security Management Security > TACACS+ TACACS+ Server Configuration link. The following screen displays: 2. In the TACACS+ Server field, enter the IP address of the server to add 3. In the Priority field, specify the order in which the TACACS+ servers are used. A value of 0 is the highest priority. 4. In the Port field, specify the authentication port number through which the TACACS+ session occurs. The default is port 49, and the range is 0-65535. 5. In the Key String field, specify the authentication and encryption key for TACACS+ communications between the switch and the TACACS+ server. This key must match the encryption used on the TACACS+ server. The valid range is 0-128 characters. Managing Device Security 165