Netgear GS752TP GS728TP/GS728TPP/GS752TP Software Administration Manual - Page 58
LLDP Port Settings
View all Netgear GS752TP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches LLDP Port Settings Use the LLDP Port Settings screen to specify LLDP parameters that are applied to a specific interface. To configure LLDP port settings: 1. Select System LLDP Advanced LLDP Port Settings. The following screen displays: 2. Select the check box next to one or more ports. 3. Specify the following LLDP port settings: • Interface. Specifies the port affected by these parameters. • Admin Status. Select the status for transmitting and receiving LLDP packets: • Tx Only. Enable only transmitting LLDP PDUs on the selected ports. • Rx Only. Enable only receiving LLDP PDUs on the selected ports. • Tx & Rx. Enable both transmitting and receiving LLDP PDUs on the selected ports. This value is the default value. • Disabled. Do not transmit or receive LLDP PDUs on the selected ports. • Management IP Address. Select whether to advertise the management IP address from the interface. The possible values are: • Stop Advertise. Do not advertise the management IP address from the interface. • Auto Advertise. Advertise the current IP address of the device as the management IP address. • Notification. When notifications are enabled, LLDP interacts with the trap manager to notify subscribers of remote data change statistics. The default is Disabled. Configuring System Information 58