Netgear GS752TP GS728TP/GS728TPP/GS752TP Software Administration Manual - Page 262

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches 3. Configure the following settings for Class1: • Protocol Type. UDP • Source IP Address. 192.12.1.0 • Source Mask. 255.255.255.0 • Source L4 Port. Other, and enter 4567 as the source port value • Destination IP Address. 192.12.2.0 • Destination Mask. 255.255.255.0 • Destination L4 Port. Other, and enter 4568 as the destination port value For more information about this screen, see Class Configuration on page 147. 4. Click APPLY. 5. In the Policy Configuration screen, create a policy with the following settings: • Policy Selector. Policy1 • Member Class. Class1 For more information about this screen, see Policy Configuration on page 153. 6. Click ADD to add the new policy. 7. Click the Policy1 to view the Policy Class Configuration screen for this policy. 8. Configure the policy attributes as follows: • Assign Queue. 3 • Policy Attribute. Simple Policy • Color Mode. Color Blind • Committed Rate. 10,000 Kbps • Committed Burst Size. 128 KB • Confirm Action. Send • Violate Action. Drop For more information about this screen, see Policy Configuration on page 153. 9. In the Service Configuration screen, select the check box next to interfaces g7 and g8 to attach the policy to these interfaces, and click APPLY. For more information, see Service Configuration on page 155. All UDP packet flows destined to the 192.12.2.0 network with an IP source address from the 192.12.1.0 network that have a Layer 4 source port of 4567 and destination port of 4568 from this switch on ports 7 and 8 are assigned to hardware queue 3. On this network, traffic from streaming applications uses UDP port 4567 as the source and 4568 as the destination. This real-time traffic is time sensitive, so it is assigned to a high-priority hardware queue. By default, data traffic uses hardware queue 0, which is designated as a best effort queue. Configuration Examples 262