Netgear GS752TP GS728TP/GS728TPP/GS752TP Software Administration Manual - Page 55
Next to Encryption Protocol, select whether to encrypt SNMPv3 packets transmitted by the, in length.
View all Netgear GS752TP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches The following screen displays: 2. Next to Authentication Protocol, select the SNMPv3 Authentication Protocol setting for the selected user account. The valid authentication protocols are None, MD5, or SHA. • None. The user is unable to access the SNMP data from an SNMP browser. • MD5 or SHA. The user login password is used as SNMPv3 authentication password, and you must therefore specify a password. The password must be eight characters in length. 3. Next to Encryption Protocol, select whether to encrypt SNMPv3 packets transmitted by the switch. • None. Do not encrypt the contents of SNMPv3 packets transmitted from the switch. • DES. Encrypt SNMPv3 packets using the DES encryption protocol. 4. If you selected DES for the Encryption Protocol, enter the SNMPv3 encryption key in the Encryption Key field. Otherwise, this field is ignored. Valid keys are 0-15 characters long. 5. Click APPLY. Configuration changes take effect immediately. Configuring System Information 55