Netgear GS752TP GS728TP/GS728TPP/GS752TP Software Administration Manual - Page 185

GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches The following screen displays: 2. To configure interface security settings for ports and link aggregation groups (LAGs), click PORTS, LAGS, or All. 3. Select the check box next to the port or LAG to configure. Select multiple check boxes to apply the same setting to all selected interfaces. Select the check box in the heading row to apply the same settings to all interfaces. 4. Specify the following settings: • Port Security. Enable or disable the port security feature for the selected port. • Max Allowed Dynamically Learned MAC. Sets the maximum number of dynamically learned MAC addresses on the selected interface. The valid range is 0-600. The default value is 600. • Enable Violation Traps. Select Yes or No to enable or disable the sending of new violation traps designating when a packet with a disallowed MAC address is received on a locked port. 5. Click APPLY to update the switch with the new settings. Security MAC Address Use the Security MAC Address screen to convert a dynamically learned MAC address to a statically locked address.  To convert learned MAC addresses: 1. Select Security  Traffic Control > Port Security  Security MAC Address. Managing Device Security 185