Netgear GS752TP GS728TP/GS728TPP/GS752TP Software Administration Manual - Page 248

A. Hardware Specifications and Default Values A The GS752TP, GS728TP, and GS728TPP switches conform to the TCP/IP, UDP, HTTP, ICMP, TFTP, DHCP, IEEE 802.1D, IEEE 802.1 p, and IEEE 802.1Q standards. They also conform to the IEEE802.3i (10BASE-T), IEEE802.3ii (100Base-TX), IEEE802.3ab (1000Base-T), IEEE802.3af (DTE Power via MDI), IEEE802.3at (DTE Power via MDI Enhancements), and IEEE802.3az (EEE) standards. Feature Interfaces Flash memory size SDRAM size and type Value 24 or 48 10/100/1000 Mbps switching ports GS752TP. The first eight ports are PoE+ (Power over Ethernet) providing 30W of DC power, and the remaining ports are PoE providing 15.4W of DC power. GS728TPGS728TP. The first eight ports are PoE+ providing 30W of DC power, and the remaining ports are PoE providing 15.4W of DC power. GS728TPP. All 24 ports are PoE+ providing 30W of DC power. This model includes an external power supply to support the increased power requirements. Four 100/1000M SFP ports (port 25-29 or 49-52) to support optical module 32 MB 128 MB DDR2 Feature Switching capacity Forwarding method Packet forwarding rate Value Non blocking full wire speed on all packet sizes Store and forward 10M: 14,880 pps 100M: 148,810 pps 1G: 1,488,000 pps 248