Netgear GS752TP GS728TP/GS728TPP/GS752TP Software Administration Manual - Page 57
System > LLDP > Advanced > LLDP Configuration., TLV Advertised Interval, Hold Multiplier
View all Netgear GS752TP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches The following screen displays: Note: You can also access the LLDP Configuration screen by selecting System > LLDP > Advanced > LLDP Configuration. 2. Configure the following LLDP settings: • TLV Advertised Interval. Specify the interval at which frames are transmitted. The default is 30 seconds, and the valid range is 5-32768 seconds. • Hold Multiplier. Specify multiplier on the transmit interval to assign to Time-to-Live (TTL). The default is 4, and the range is 2-10. • Reinitializing Delay. Specify the delay before a reinitialization. The default is 2 seconds, and the range is 1-10 seconds. • Transmit Delay. Specify the interval for the transmission of notifications. The default is 5 seconds, and the range is 5-3600 seconds. 3. To change the LLDP-MED properties in the Fast Start Duration field, specify the number of LLDP packets sent when the LLDP-MED Fast Start mechanism is initialized. This occurs when a new endpoint device links with the LLDP-MED network connectivity device. The default value is 3, and the range is from 1-10. 4. Click APPLY. Configuration changes take effect immediately. Configuring System Information 57