Pioneer AVIC U310BT Owner's Manual - Page 114

Problems in the audio screen

Page 114 highlights

Appendix Appendix The map color does not switch automatically between daytime and nighttime. [Day/Night Display] is set to [Day]. Check [Day/Night Display] setting and make sure [Automatic] is selected. (Page 27) The screen is too bright. An improper value has been set on Check the settings. "Brightness". The display is very dim. An improper value has been set on Check the settings. "Brightness". No sounds of audio source are produced. The volume level will not rise. The volume level is low. A speaker lead is disconnected. Adjust the volume level. Check the connection. The volume of navigation gui- Try to adjust them with MULTI-CON- Turn the volume up or down using [Sound] dance and beeps cannot be ad- TROL. on the "Settings Menu" screen. (Page 59) justed. The person on the other end of the phone call cannot hear the conversation due to an echo. The voice from the person on the Use the following methods to reduce the other end of the phone call is output echo: from the speakers and then picked -Lower the volume on the receiver up by the microphone again, creat- -Have both parties pause slightly before ing an echo. speaking There's no picture. The backlight of the LCD panel is turned off. Turn on the backlight. (Page 64) There is no response when the The touch panel keys deviate from Perform touch panel calibration. (Page 62) touch panel key are touched, or the actual positions that respond to a different key responds. your touch for some reason. Problems in the audio screen Symptom CD playback is not possible. The audio skips. No sounds are produced. The volume level will not rise. Cause Action (Reference) The disc is inserted upside down. Insert the disc with the label upward. The disc is dirty. Clean the disc. The disc is cracked or otherwise da- Insert a normal, round disc. maged. The files on the disc are an irregular Check the file format. file format. The disc format cannot be played Replace the disc. back. The loaded disc is a type this system Check what type of disc it is. (For more cau- cannot play. tions about handling each type of media, refer to Page 124.) The navigation system is not firmly Secure the navigation system firmly. secured. Cables are not connected correctly. Connect the cables correctly. The system is paused or performing, There is no sound on fast reverse or forward. fast reverse or forward during the audio playback. 114 En

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137

The map color does not switch
automatically between daytime
and nighttime.
[
Day/Night Display
] is set to [
Day
].
Check [
Day/Night Display
] setting and make
sure [
Automatic
] is selected. (Page 27)
The screen is too bright.
An improper value has been set on
Brightness
.
Check the settings.
The display is very dim.
An improper value has been set on
Brightness
.
Check the settings.
No sounds of audio source are
produced.
The volume level will not rise.
The volume level is low.
Adjust the volume level.
A speaker lead is disconnected.
Check the connection.
The volume of navigation gui-
dance and beeps cannot be ad-
justed.
Try to adjust them with
MULTI-CON-
TROL
.
Turn the volume up or down using [
Sound
]
on the
Settings Menu
screen. (Page 59)
The person on the other end of
the phone call cannot hear the
conversation due to an echo.
The voice from the person on the
other end of the phone call is output
from the speakers and then picked
up by the microphone again, creat-
ing an echo.
Use the following methods to reduce the
echo:
Lower the volume on the receiver
Have both parties pause slightly before
speaking
There
s no picture.
The backlight of the LCD panel is
turned off.
Turn on the backlight. (Page 64)
There is no response when the
touch panel key are touched, or
a different key responds.
The touch panel keys deviate from
the actual positions that respond to
your touch for some reason.
Perform touch panel calibration. (Page 62)
Problems in the audio screen
Symptom
Cause
Action (Reference)
CD playback is not possible.
The disc is inserted upside down.
Insert the disc with the label upward.
The disc is dirty.
Clean the disc.
The disc is cracked or otherwise da-
maged.
Insert a normal, round disc.
The files on the disc are an irregular
file format.
Check the file format.
The disc format cannot be played
back.
Replace the disc.
The loaded disc is a type this system
cannot play.
Check what type of disc it is. (For more cau-
tions about handling each type of media,
refer to Page 124.)
The audio skips.
The navigation system is not firmly
secured.
Secure the navigation system firmly.
No sounds are produced.
The volume level will not rise.
Cables are not connected correctly.
Connect the cables correctly.
The system is paused or performing,
fast reverse or forward during the
audio playback.
There is no sound on fast reverse or forward.
Appendix
En
114
Appendix