Pioneer AVIC U310BT Owner's Manual - Page 117
Messages for audio functions, Appendix - problems with ipod
UPC - 012562956299
View all Pioneer AVIC U310BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Appendix Appendix Appendix Messages for audio functions When problems occur in the audio source, a message may appears on the display. Refer to the table below to identify the problem, then take the suggested corrective action. If the error persists, contact your dealer or your nearest Pioneer Service Center. Built-in CD drive Message Cause Action (Reference) Error-11, 12, 17, 30 Dirty Clean the disc. Scratched disc Replace the disc. Error10, 11, 12, 15, 17, 30, A0, Electrical or mechanical CHK CDCORE Turn the ignition switch OFF and back ON, or switch to a different source, then back to the CD player. Error-15 The inserted disc does not contain Replace the disc. any data. Error-23 The CD format cannot be played back. Replace the disc. Error-22 The inserted disc does not contain Replace the disc. any files that can be played back. No Audio The inserted disc does not contain Replace the disc. any files that can be played back. TRK Skipped The inserted disc contains files that Replace the disc. are protected by DRM. Protect All the files on the inserted disc are Replace the disc. secured by DRM. Heat The temperature of the navigation Wait until the unit's temperature returns to system is outside of the normal op- within normal operating limits. erating range. USB/iPod Message No Audio Protect TRK Skipped Check USB Error-A1 Cause Action (Reference) The connected USB storage device Store playable files. does not contain any files that can be played back. All the files on the inserted external Store playable files. storage device are secured by DRM. The protected files are skipped. Store playable files. The USB connector or USB cable is Confirm that the USB connector or USB short-circuited. cable is not caught in something or da- maged. The connected USB storage device Disconnect the USB storage device and do consumes more than 500 mA (maxi- not use it. Turn the ignition switch to OFF, mum allowable current). then to ACC or ON and then connect the compliant USB storage device. The connected USB storage device Disconnect the USB storage device and do consumes more than 500 mA (maxi- not use it. Turn the ignition switch to OFF, mum allowable current). then to ACC or ON and then connect the compliant USB storage device. En 117