Pioneer AVIC U310BT Owner's Manual - Page 74

Chapter 15 Using the radio (AM) You can listen to the radio using this navigation system. This section describes operations for radio (AM). 1 Press SRC/OFF button to display the "TUNER" screen. = For details, refer to Switching the audio operation screen on page 69. 2 Press BAND/ESC button repeatedly until "AM" in the display. Reading the screen Operating by hardware buttons Pressing BAND/ESC button Band can be selected from among FM1, FM2, FM3, or AM. Pressing MULTI-CONTROL up or down You can recall radio stations assigned to preset tuning keys to . Pressing MULTI-CONTROL left or right The frequencies move up or down step by step. Pressing and holding MULTI-CONTROL left or right The tuner will scan the frequencies until a broadcast strong enough for good reception is found. p You can cancel seek tuning by pressing MULTI-CONTROL left or right. Pressing the center of MULTI-CONTROL The function select screen appears. 1 Source icon Shows which source has been selected. 2 Preset number indicated next to "P.CH" Shows what preset item has been selected. 3 Frequency 4 Signal level indicator 5 Touch panel keys to : Recalls radio stations. = For details, refer to Storing and recalling broadcast frequencies on this page. 6 Local indicator Shows when local seek tuning is on. = For details, refer to Tuning in strong sig- nals on the next page. Storing and recalling broadcast frequencies With a touch of any of the preset tuning keys ( to ), you can easily store up to six broadcast frequencies for later recall (also with the touch of a key). 1 When you find a frequency that you want to store in memory, keep touching a preset tuning key to until the preset number (e.g., P.CH1) stops flashing. The selected radio station has been stored in memory. p Up to 6 stations can be stored in memory. 2 Touch the same preset tuning key to . The radio station frequencies are recalled from memory. 74 En