Ricoh Aficio SP C320DN Manuals - Page 217

Other Printing Problems • If document size is larger than paper size, e.g. A4 document on B5 paper, the back of the next printed sheet may be dirtied. If rubbed with your finger, it smears out. • The setting of the paper may not be correct. For example, although thick paper is used, the setting for thick paper may not be set. • Check the paper settings of this printer. For details, see p.108 "Supported Paper Types". • Check the paper settings of the printer driver. For details, see the printer driver Help. • The fusing unit is deteriorated or damaged. Replace the unit. For details, see p.172 "Replacing the Maintenance Kit". When printing on plain paper, white dots are obvious. • The registration roller or the paper tray is dirty. Clean the registration roller or the paper tray. For details, see p.185 "Cleaning the Registration Roller and the Paper Tray". After replacing a color print cartridge, colorless dots appear in solid color printouts. • Select "Recycled Paper" in the paper type settings. See p.131 "Specifying a paper type for standard or optional paper feed tray" or p.137 "Specifying a paper type for the bypass tray" . Paper Misfeeds Occur Frequently Paper jams occur frequently. 9 • Number of paper set in the tray exceeds the limit. Confirm that the top of the stack is not higher than the limit mark inside the tray. For details, see p.105 "Supported Paper for Each Tray". • There may be a gap between the front guide and the paper, or between the side guides and the paper in the paper tray. Make sure there are no gaps. For details, see p.105 "Supported Paper for Each Tray". • Paper is either too thick or too thin. For details, see p.108 "Supported Paper Types". • Paper is bent or wrinkled. Use paper that have no bents or wrinkles. For details, see p.108 "Supported Paper Types". • Paper has already been printed on. For details, see p.108 "Supported Paper Types". 215