Ricoh Aficio SP C320DN Manuals - Page 96
Setting WPA, Press [Enter].
View all Ricoh Aficio SP C320DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
5. Configuration 5. Press the [ ] or [ ] key to select [WEP], and then press [Details]. When activating the WEP setting, you will need to enter the WEP key. If you have not entered the key, be sure to enter it. 6. Press [Enter]. 7. Enter the characters, and then press [Accept]. 5 • When entering a character, pressing [Accept] will mask it with an asterisk for security reasons. • When using 64-bit WEP, up to 10 hexadecimal characters or five ASCII characters can be entered. When using 128-bit WEP, up to 26 hexadecimal characters or 13 ASCII characters can be used. • Up to 10 or 26 hexadecimal characters and 5 or 13 ASCII characters can be entered. • For ASCII character strings, uppercase and lowercase letters are differentiated, so be sure to enter characters in the required case. 8. Press the [ ] or [ ] key to select [WEP], and then press the [OK] key. 9. Press the [Menu] key to return to the initial screen. 10. Print a configuration page to confirm the settings. • The WEP key can also be set using a Web browser. For details, see Web Image Monitor Help. • For details about printing the configuration page, see "Test Printing". • p.43 "Test Printing" Setting WPA In the case of using WPA on a network, activate the WPA setting to be used for communication along with WPA. Consult your network administrator for information about making authentication settings. 94