Samsung SCX 6320F User Manual (ENGLISH) - Page 157
Start, Stop/Clear, Clear
UPC - 807027532442
View all Samsung SCX 6320F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
Display Retry Redial? (only for SCX-6320F) Scanner Locked Toner Empty Replace Toner Toner Low DUPLEX JAM Function Impossible DIMM not installed NETWORK IP Conflict Not Assigned Meaning Solution The machine is waiting for a specified time interval to redial a previously busy station. You can press Start to redial immediately, or Stop/Clear to cancel the redial operation. The scan module is locked. Unlock the scanner (see page 1.2) and press Stop/ Clear. The toner cartridge has run out. The machine stops. Replace the old cartridge with new one. See page 7.3. The toner is almost empty. Take out the toner cartridge and gently shake it. By doing this, you can temporarily reestablish printing operations. When the machine detected the duplex jam in the middle of 2-sided printing. Remove the jammed paper Means that these modes can not be worked together or not supported in your current machine configurations. In case of copying, try again without function combination .For Scan-To-Email, please check secured connection of the DIMM and QWERTY keyboard Not installed the DIMM for Fax then will be displayed this message on the LCD. Check the DIMM in the expanding memory slot. *Please test the RAM testing in engine test mode. *If the problem in DIMM, replace the DIMM. An IP Conflict occurs when your MFP's network settings are configured incorrectly. Correct the network settings. Not Assigned. The Group Mail you tried to use has no email assigned to it. Type the email manually with the QWERTY Keyboard/ Numeric key pad, or assign the email. 8.16 TROUBLESHOOTING