Samsung SCX 6320F User Manual (ENGLISH) - Page 219
Enter, Stop/Clear, Dynamic Addressing BOOTP/DHCP, Enter a number between 0, and 255 for each byte.
UPC - 807027532442
View all Samsung SCX 6320F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 219 highlights
4 Press the scroll buttons until "Manual" displays on the bottom line. Press Enter to access the menu. 5 Press the scroll buttons to select IP Address, Subnet Mask, GateWay, Primary DNS, Secondary DNS or LDP/LPR Raw Printing HTTP on the bottom line. 6 Press Enter to set an address. A TCP/IP address consists of 4 bytes. Enter a number between 0 and 255 for each byte. 7 Enter a number between 0 and 255 for each byte and press Enter. You can move between each byte by pressing the scroll buttons. 8 Repeat steps 4 through 5 to configure the other TCP/IP parameters, such as subnet mask and gateway. 9 When you are finished, press Stop/Clear. Dynamic Addressing (BOOTP/DHCP) To allow the server to automatically assign the TCP/IP address, take the following steps: 1 Refer to steps from 1 to 3 on page D.9. 2 Press the scroll buttons to select the server to assign the TCP/IP address, DHCP or BOOTP. Press Enter to save the selection. 3 When you are finished, press Stop/Clear. D.10 INSTALLING OPTIONS