Samsung SCX 6320F User Manual (ENGLISH) - Page 40
CCD Power Save Mode, Time Out, Enter, Stop/Clear
UPC - 807027532442
View all Samsung SCX 6320F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
3 Press the scroll buttons to display "On" on the bottom line and press Enter. Selecting "Off" means that the power save mode turns off. 1 4 Press the scroll buttons until the time settings you want appears. The available options are 5, 10, 15, 30 and 45 (minutes). 5 Press Enter to save the selection. 6 To return to Standby mode, press Stop/Clear. CCD Power Save Mode The scan lamp under the document glass automatically turns off when it is not in actual use to reduce power consumption and extend the lamp life. The lamp automatically wakes up after some warm-up time when you start scanning. You can set the length of time for which the scan lamp waits after a scan job is completed before it switches to the power save mode. 1 Press Menu until "Machine Setup" appears on the top line of the display. 2 Press the scroll buttons until "CCD Power Save" appears on the bottom line of the display and then press Enter. 3 Press the scroll buttons until the time settings you want appears. The available options are 1, 4, 8 and 12 (hours). 4 Press Enter to save the selection. 5 To return to Standby mode, press Stop/Clear Time Out You can further select the length of time the machine waits after a job is printed before it switches to a reduced power state. 1 Press Menu until "Machine Setup" appears on the top line of the display. GETTING STARTED 1.19