Toshiba ESTUDIO355 Troubleshooting Guide - Page 31
Paper jam in the Saddle Stitch Finisher MJ-1024 and the Hole Punch Unit MJ-6004 (both optional)
View all Toshiba ESTUDIO355 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
1.TROUBLESHOOTING FOR THE HARDWARE 1 TROUBLESHOOTING FOR THE HARDWARE Paper jam in the Saddle Stitch Finisher MJ-1024 and the Hole Punch Unit MJ-6004 (both optional) 1 Hold up the guide of the paper exit portion and remove the jammed paper. When the Hole Punch Unit MJ-6004 is installed, proceed to step 2. If not, go to step 6. 1 2 When the Hole Punch Unit MJ-6004 is installed 2 Open the Hole Punch Unit cover. 3 Turn the green knob to locate within the area indicated on the label. With the knob set in this position, the punches are up so that paper can be released. 4 Lift up the Hole Punch Unit and remove the jammed paper. 1 2 Clearing a Paper Jam 29
1.TROUBLESHOOTING FOR THE HARDWARE
Clearing a Paper Jam
29
1 TROUBLESHOOTING FOR THE HARDWARE
Paper jam in the Saddle Stitch Finisher MJ-1024 and the Hole Punch Unit MJ-6004 (both optional)
When the Hole Punch Unit MJ-6004 is installed
1
Hold up the guide of the paper exit portion and
remove the jammed paper.
When the Hole Punch Unit MJ-6004 is installed, proceed to step 2. If
not, go to step 6.
2
Open the Hole Punch Unit cover.
3
Turn the green knob to locate
within the area
indicated on the label.
With the knob set in this position, the punches are up so that paper can
be released.
4
Lift up the Hole Punch Unit and remove the jammed
paper.
1
2
1
2