Toshiba ESTUDIO355 Troubleshooting Guide - Page 36
Paper jam in the Hole Punch Unit of the Saddle Stitch Finisher MJ-1025 (optional)
View all Toshiba ESTUDIO355 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
1 TROUBLESHOOTING FOR THE HARDWARE Paper jam in the Hole Punch Unit of the Saddle Stitch Finisher MJ-1025 (optional) Be careful not to let your fingers be caught between the equipment and the finisher (optional). This could injure you. 1 Separate the finisher from the equipment. Press the lever to unlock the finisher and slowly separate it from the equipment, placing both of your hands on the front and back of the finisher. 2 Turn the green knob until the triangle mark ( ) falls within the diagonal-line area on the right side of the knob. With the knob set in this position, the punches are up so that paper can be released. 3 Remove the jammed paper. 4 Connect the finisher to the equipment. Move the finisher slowly toward the equipment, placing both of your hands on the front and the back of the finisher. 34 Clearing a Paper Jam