Toshiba ESTUDIO355 Troubleshooting Guide - Page 46
Clearing a Staple Jam, Staple jam in a finisher, Finisher MJ-1101
View all Toshiba ESTUDIO355 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
1 TROUBLESHOOTING FOR THE HARDWARE Clearing a Staple Jam When a staple jam has occurred in the stapler of the finisher or saddle stitch unit, clear the jam following the procedure below. P.44 "Staple jam in a finisher" P.51 "Staple jam in the saddle stitch unit" Staple jam in a finisher Finisher MJ-1101 1 Open the front cover of the finisher. 2 Remove the staple cartridge. 3 Lower the guide while holding the knob. A: Stapling area A Do not touch the stapling area. The actual needle point could cause you personal injury. 4 Remove the jammed staples. 44 Clearing a Staple Jam
1 TROUBLESHOOTING FOR THE HARDWARE
44
Clearing a Staple Jam
Clearing a Staple Jam
When a staple jam has occurred in the stapler of the finisher or saddle stitch unit, clear the jam following the procedure
below.
P.44 “Staple jam in a finisher”
P.51 “Staple jam in the saddle stitch unit”
Staple jam in a finisher
Finisher MJ-1101
1
Open the front cover of the finisher.
2
Remove the staple cartridge.
3
Lower the guide while holding the knob.
A: Stapling area
Do not touch the stapling area.
The actual needle point could cause you personal injury.
4
Remove the jammed staples.
A