Toshiba ESTUDIO355 Troubleshooting Guide - Page 63
Saddle Stitch Finisher MJ-1024
View all Toshiba ESTUDIO355 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
1.TROUBLESHOOTING FOR THE HARDWARE 1 TROUBLESHOOTING FOR THE HARDWARE 5 Fit the staple cartridge into the stapler. When fitting the staple cartridge, hold the green-labeled portion of the bracket securely so that the bracket will not move. Insert the cartridge until it is caught by the latch and fixed with a click. 6 Close the front cover of the finisher. If the message "Check staple cartridge" remains, repeat the procedure above from steps 1 to 6. Saddle Stitch Finisher MJ-1024 1 Open the front cover of the finisher. 2 Remove the staple cartridge. 3 Press the buttons on both sides of the cartridge. The transparent cover of the cartridge is lifted. Refilling With Staples 61
1.TROUBLESHOOTING FOR THE HARDWARE
Refilling With Staples
61
1 TROUBLESHOOTING FOR THE HARDWARE
6
Close the front cover of the finisher.
If the message “Check staple cartridge” remains, repeat the procedure above from steps 1 to 6.
Saddle Stitch Finisher MJ-1024
5
Fit the staple cartridge into the stapler.
When fitting the staple cartridge, hold the green-labeled portion of the
bracket securely so that the bracket will not move.
Insert the cartridge until it is caught by the latch and fixed with a click.
1
Open the front cover of the finisher.
2
Remove the staple cartridge.
3
Press the buttons on both sides of the cartridge.
The transparent cover of the cartridge is lifted.