Toshiba M200-ST2002 Maintenance Manual - Page 101

3.1 The Diagnostic Test 3 Tests and Diagnostics 3 Tests and Diagnostics 3.1 The Diagnostic Test This chapter explains how to use the Diagnostic Test program which tests the functions of the computer's hardware modules and the Hardware Initial information Setting Tool which sets the configurations needed after repairing. The Diagnostic Test Program is grouped into the Service Program Modules and the Test Program Modules. The Diagnostic Test consists of 10 programs. Wireless LAN test, Sound/LAN/modem test and Bluetooth test are also supported. The Hardware Initial information Setting Tool consists of some programs which writes the hardware information or displays the current information of the computer. NOTE: To start the diagnostics, follow these steps: 1. Check all cables for loose connections. 2. Exit any application and close Windows. 3.1.1 Diagnostics menu The DIAGNOSTICS MENU consists of the following 7 test programs. q DIAGNOSTIC TEST q HEAD CLEANING q LOG UTILITIES q RUNNING TEST q FDD UTILITIES q SYSTEM CONFIGURATION q SETUP The DIAGNOSTIC TEST MENU contains the following 10 functional tests: q SYSTEM TEST q MEMORY TEST q KEYBOARD TEST q DISPLAY TEST q FLOPPY DISK TEST q ASYNC TEST q HARD DISK TEST q REAL TIMER TEST 3-1 Portege M200 Maintenance Manual (960-457)