Toshiba M200-ST2002 Maintenance Manual - Page 236
Application switch board/Power switch board/LCD latch assembly, Application
![]() |
View all Toshiba M200-ST2002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 236 highlights
4.20 Application switch board/Power switch board/LCD latch assembly 4 Replacement Procedures 4.20 Application switch board/Power switch board/LCD latch assembly 4.20.1 Application switch board/Power switch board Removing the Application switch board/Power switch board The following describes the procedure for removing the Application switch board/Power switch board. (See Figure 4-35 to 4-36.) 1. Remove the following screws securing the application switchboard and remove the application switchboard. • M2 ×4Z BIND screw x1 M2x4Z BIND Application switch board Figure 4-35 Removing the application switch board 2. Disconnect the harness from the connector on the application switchboard. 3. Remove the following screws securing the Power switchboard and remove the Power switchboard. • M2 ×4Z BIND screw x1 M2x4Z BIND Power Switch board Figure 4-36 Removing the power switch board Portege M200 Maintenance Manual (960-457) 4-47
![](/manual_guide/products/toshiba-m200st2001-maintenance-manual-c5b52ff/236.png)