Toshiba M200-ST2002 Maintenance Manual - Page 175

3.26 SETUP 3 Tests and Diagnostics LCD Brightness Use this option to set the level of LCD brightness. Super-Bright Full brightness for maximum visibility. Bright Full brightness for high visibility. Semi-Bright Less than full brightness for saving power. Cooling Method Maximum Performance If the CPU becomes too hot, the fan turns on automatically in a high speed to cool down the CPU. Performance If the CPU becomes too hot, the fan turns on automatically. When the CPU temperature falls to a normal range, the fan turns off. Battery optimized If the CPU becomes too hot, the processing speed is lowered. If the temperature is still too high, the fan turns on. When the CPU temperature falls to a normal range, the fan is turned off and the processing speed is increased. NOTE: Too hot condition may cause defect on the CPU. When the hot condition continues, the power is automatically turned off in resume mode. 4. Password When the incorrect password is continuously entered three times, the cursor does not move to this option. In this case, reboot the computer and register the password again. Registered Not registered The user password has been registered. The user password has not been registered. For details on setting the user password, refer to the User's Manual. 5. HDD Password NOTE: The contents of this option cannot be changed when the setup is started from the test program. (1) HDD This option specifies the HDD to which the password is set. The built-in HDD is specified and you cannot change it. Portege M200 Maintenance Manual (960-457) 3-73