Toshiba M200-ST2002 Maintenance Manual - Page 244
Removing the Digitizer, Replacement Procedures,
![]() |
View all Toshiba M200-ST2002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 244 highlights
4.21 Digitizer 4 Replacement Procedures Removing the Digitizer The following describes the procedure for removing the digitizer. (See Figure 4-38.) 1.Peel off two tapes securing the digitizer. 2.Remove the following screws securing the digitizer. • M2×4Z BIND screw x2 3.Pull the digitizer toward the arrow direction in the figure below and remove the digitizer. Glass tape M2x4Z BIND Glass tape Figure 4-38 Removing the Digitizer Installing the digitizer The following describes the procedure for installing the digitizer. (See Figure 4-38.) 1.Slide the digitizer into the back of the LCD. 2.Secure the digitizer with the following screws. • M2×4Z BIND screw x2 3.Stick two glass tapes to secure the digitizer. Portege M200 Maintenance Manual (960-457) 4-55
![](/manual_guide/products/toshiba-m200st2001-maintenance-manual-c5b52ff/244.png)