Toshiba M200-ST2002 Maintenance Manual - Page 69
USB 3.5” FDD Troubleshooting, Procedure 1, FDD Head Cleaning Check
View all Toshiba M200-ST2002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
2.5 USB 3.5" FDD Troubleshooting 2 Troubleshooting 2 2.5 USB 3.5" FDD Troubleshooting This section describes how to determine if the USB 3.5" FDD is functioning properly. Perform the steps below starting with Procedure 1 and continuing with the other procedures as required. Procedure 1: FDD Head Cleaning Check Procedure 2: Diagnostic Test Program Execution Check Procedure 3: Connector Check and Replacement Check Procedure 1 FDD Head Cleaning Check FDD head cleaning is one option available in the Diagnostic Program. Insert the Diagnostics Disk in the USB floppy disk drive, turn on the computer and run the test. And then clean the FDD heads using the cleaning kit. If the FDD still does not function properly after cleaning, go to Procedure 2. Detailed operation is given in Chapter 3, Tests and Diagnostics. If the test program cannot be executed on the computer, go to Procedure 3. Portege M200 Maintenance Manual (960-457) 2-31