Toshiba M200-ST2002 Maintenance Manual - Page 256
Fluorescent, Caution, Use a Philips screwdriver with type 0 bit.
![]() |
View all Toshiba M200-ST2002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 256 highlights
4.24 Fluorescent Lamp 4 Replacement Procedures Caution: Be careful not to damage the cell, TAB and B/L. Hook the latch on the top. Hook the latch on the side. Hook the latch on the side. Set the bezel on the frame. Figure 4-51 Replacing Toshiba fluorescent lamp(10) 5.Screwing the PCB and the bezel 1) Use four screws to secure the left and right edge. Caution: 1) The screw tightening torque is 0.147N·m (1.5kgf·cm) for all screws. Be careful not to float the screw. 2) Use a Philips screwdriver with type 0 bit. Screw Screw Figure 4-52 Replacing Toshiba fluorescent lamp(11) Portege M200 Maintenance Manual (960-457) 4-67
![](/manual_guide/products/toshiba-m200st2001-maintenance-manual-c5b52ff/256.png)
4.24
Fluorescent
Lamp
4
Replacement Procedures
Portege M200 Maintenance Manual (960-457)
4-67
Caution
: Be careful not to damage the cell, TAB and B/L.
Set the bezel on the frame.
Hook the latch on the side.
Hook the latch on the side.
Hook the latch on the top.
Figure 4-51
Replacing Toshiba fluorescent lamp(10)
5.
Screwing the PCB and the bezel
1) Use four screws to secure the left and right edge.
Caution:
1) The screw tightening torque is 0.147N·m (1.5kgf·cm) for all screws.
Be careful not to float the screw.
2) Use a Philips screwdriver with type 0 bit.
Screw
Screw
Figure 4-52
Replacing Toshiba fluorescent lamp(11)