Toshiba M200-ST2002 Maintenance Manual - Page 204

4.6 Memory module 4 Replacement Procedures 4.6 Memory module Caution: The power must be turned off when you remove the memory module. Removing a memory module with the power on risks damaging the module or the computer itself. Do not touch the memory module terminals. Any dirt on the terminals may cause memory access problems. Never press hard or bend the memory module. Removing the memory module To remove the memory module(s), confirm that the computer is in boot mode. T hen perform the following procedure. (See Figure 4-6.) 1. Turn the computer upside down. 2. Loosen the screw with e-ring fixing the memory slot cover. 3. Remove the memory slot cover. 4. Open the left and right latches and remove the memory module(s). Screw with e-ring Memory slot cover Memory module Slot A Slot B Figure 4-6 Removing the memory module Portege M200 Maintenance Manual (960-457) 4-15