Toshiba M200-ST2002 Maintenance Manual - Page 228
Second FAN, Removing the Second FAN
![]() |
View all Toshiba M200-ST2002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 228 highlights
4.17 Second FAN 4.17 Second FAN 4 Replacement Procedures Removing the Second FAN The following describes the procedure for removing the Second FAN. (See Figure 4-27.) 1.Remove the following screws securing the Second FAN unit. • M2.5×4B FLAT BIND screw x2 2.Remove the Second FAN unit from the base cover assembly. M2.5x4B FLAT BIND Second FAN Figure 4-27 Removing the Second FAN Installing the Second FAN The following describes the procedure for installing the Second FAN. (See Figure 4-27.) 1.Install the Second FAN unit on the base cover assembly. 2.Secure the Second FAN unit with the following screws. • M2.5×4B FLAT BIND screw x2 Portege M200 Maintenance Manual (960-457) 4-39
![](/manual_guide/products/toshiba-m200st2001-maintenance-manual-c5b52ff/228.png)
4.17
Second
FAN
4
Replacement Procedures
Portege M200 Maintenance Manual (960-457)
4-39
4.17 Second FAN
Removing the Second FAN
The following describes the procedure for removing the Second FAN. (See Figure 4-27.)
1.
Remove the following screws securing the Second FAN unit.
•
M2.5
×
4B FLAT BIND screw
x2
2.
Remove the Second FAN unit from the base cover assembly.
M2.5x4B
FLAT BIND
Second FAN
Figure 4-27
Removing the Second FAN
Installing the Second FAN
The following describes the procedure for installing the Second FAN. (See Figure 4-27.)
1.
Install the Second FAN unit on the base cover assembly.
2.
Secure the Second FAN unit with the following screws.
•
M2.5
×
4B FLAT BIND screw
x2