Toshiba M200-ST2002 Maintenance Manual - Page 208
Base cover assembly, Removing the base cover assembly
![]() |
View all Toshiba M200-ST2002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 208 highlights
4.8 Base cover assembly 4.8 Base cover assembly 4 Replacement Procedures Removing the base cover assembly The following describes the procedure for removing the base cover assembly. (See Figure 4-9 to 4-11.) 1. After Peeling off the glass tape, turn up the insulator and disconnect the speaker cable. 2. After turning up the insulator, unlock the connector and disconnect the LED flexible cable and the Touch Pad flexible cable. PJ3260 LED flexible cable PJ3240 Touch Pad flexible cable Glass tape Speaker cable PJ6005 Figure 4-9 Disconnecting the cables 3. Close the display and turn the computer upside down. 4. Disconnect the second FAN cable from the system board near the memory slot. Memory slot Insert the cable under the chassis after connecting it to the connector on the system board. PJ8425 Second FAN cable Figure 4-10 Disconnecting the second FAN cable Portege M200 Maintenance Manual (960-457) 4-19
![](/manual_guide/products/toshiba-m200st2001-maintenance-manual-c5b52ff/208.png)