Toshiba M200-ST2002 Maintenance Manual - Page 113

3.5 System Test 3 Tests and Diagnostics Subtest 05 Subtest 06 Subtest 07 Subtest 08 Press [Enter] key The following message will appear. Make sure the high-speed revolution of the fan starts and press Enter. *** Test Fan Revolution High Speed Start Press [Enter] key Geyserville If the CPU supports Gerserville (SpeedStep), this Subtest checks that the CPU operating clock speed can be changed. Quick charge This subtest checks the status for the quick charge. DMI read This subtest displays the information in the Flash-ROM in the following format. Model Name Version Number Serial Number Model Number PCN/BND Number UUID Number : XXXXXXXXXXX : XXXXXXXXXXXX : XXXXXXXX : XXXXXX-XXXXX : XXXXXXXXXXXX/XXXXXXXXXXX : XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Press [Enter] to EXIT To exit this subtest and return to the SYSTEM test menu, press Enter. DMI write The following messages appear in order. Input each information. (If you do not replace the PCB, the DMI information should not be changed.) 1. "Enter Model Name ?" is displayed. Input the computer's model name and press Enter. (e.g. Portege) 2. "Enter Version Number ?" is displayed. Input the computer's version number and press Enter. (e.g. PC18070C313S) 3. "Enter Serial Number ?" is displayed. Portege M200 Maintenance Manual (960-457) 3-13