Toshiba M200-ST2002 Maintenance Manual - Page 139
Bluetooth Test, Bluetooth, Tests and Diagnostics
![]() |
View all Toshiba M200-ST2002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
3.16 Bluetooth Test 3 Tests and Diagnostics 3.16 Bluetooth Test To execute the Bluetooth Test, use the Test Diagnostics disk (Bluetooth). Finish the tests of the Diagnostics disk (T&D) by selecting 99 - EXIT TO DIAGNOSTICS MENU in the DIAGNOSTIC TEST MENU. Then in the DIAGNOSTICS MENU, select 9 - EXIT TO MSDOS. Insert the Test program disk (Bluetooth) in the floppy disk drive and turn on the power. NICSPC73.EXE Follow the steps below to perform the test program, NICSPC73.EXE. This Program checks the BD_ADDR function. Refer to Section 2.16, Bluetooth Troubleshooting, for a detailed description of the troubleshooting procedures for the Bluetooth. 1. Preparing the target machine for NICSPC73.EXE (a) Insert a floppy disk containing the test program into the target machine and turn on the target machine. (b) Prompts are displayed as shown in figure 3-1, if it is the first time the program has run. Bluetooth Subsystem T&D for PCSE(BD_ADDR) VerX.XX Copyright (C) by TOSHIBA Co Initializing ... Figure 3-1 Initializing for NICSPC73.EXE Portege M200 Maintenance Manual (960-457) 3-37
![](/manual_guide/products/toshiba-m200st2001-maintenance-manual-c5b52ff/139.png)