Toshiba M200-ST2002 Maintenance Manual - Page 82
LAN Troubleshooting
View all Toshiba M200-ST2002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
2 Troubleshooting Procedures 2.11 LAN Troubleshooting 2.11 LAN Troubleshooting To check if the computer's LAN is defective or malfunctioning, follow the troubleshooting procedures below as instructed. Procedure 1: Diagnostic Test Program Execution Check Procedure 2: Connector Check and Replacement Check Procedure 1 Diagnostic Test Program Execution Check To check the LAN function, execute the Sound/LAN/modem test program subtest 04 (LAN test). See Chapter 3 for information on how to perform the test. If any error is detected by the test, go to Procedure 2. Procedure 2 Connector Check and Replacement Check The LAN function is installed on the system board. The RJ45 jack is mounted on the system board. If the LAN malfunctions, the system board might be faulty. Disassemble the computer following the steps described in Chapter 4 and replace the system board. RJ45 jack PJ4100 2-44 Portege M200 Maintenance Manual (960-457)