Toshiba M200-ST2002 Maintenance Manual - Page 229
Pen holder/Battery lock/Latch assembly, Replacement Procedures,
![]() |
View all Toshiba M200-ST2002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 229 highlights
4 Replacement Procedures 4.18 Pen holder/Battery lock/Latch assembly 4.18 Pen holder/Battery lock/Latch assembly 4.18.1 Pen holder Removing the Pen holder The following describes the procedure for removing the Pen holder. (See Figure 4-28.) 1. Remove the following screws securing the pen holder. • M2.5×4B FLAT BIND screw x2 2. Remove the pen holder from the base cover. M2.5x4B FLAT BIND Pen Holder Figure 4-28 Removing the Pen holder Install ing the Pen holder The following describes the procedure for installing the Pen holder. (See Figure 4-28.) 1.Install the pen holder on the base cover. 2.Secure the pen holder with the following screws. • M2.5×4B FLAT BIND screw x2 4 -4 0 Portege M200 Maintenance Manual(960 -457)
![](/manual_guide/products/toshiba-m200st2001-maintenance-manual-c5b52ff/229.png)
4
Replacement Procedures
4.18
Pen holder/Battery lock/Latch assembly
4-40
Portege M200 Maintenance Manual (960 -457)
4.18 Pen holder/Battery lock/Latch assembly
4.18.1
Pen holder
Removing the Pen holder
The following describes the procedure for removing the Pen holder. (See Figure 4-28.)
1.
Remove the following screws securing the pen holder.
•
M2.5
×
4B FLAT BIND
screw
x2
2.
Remove the pen holder from the base cover.
M2.5x4B
FLAT BIND
Pen Holder
Figure 4-28
Removing the Pen holder
Installing the Pen holder
The following describes the procedure for installing the Pen holder. (See Figure 4-28.)
1.
Install the pen holder on the base cover.
2.
Secure the pen holder with the following screws.
•
M2.5
×
4B FLAT BIND
screw
x2