Toshiba M200-ST2002 Maintenance Manual - Page 225
Speaker/LED board, Speaker, Removing the speaker, Installing the speaker
View all Toshiba M200-ST2002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 225 highlights
4 Replacement Procedures 4.16 Speaker/LED board 4.16 Speaker/LED board 4.16.1 Speaker Removing the speaker The following describes the proced ure for removing the speaker. (See Figure 4-25.) 1. Remove the following screws securing the speaker holder and remove the speaker holder. • M2.5×3B S-THIN screw x2 2. Remove the speaker from the speaker holder. M2.5x3B S-THIN Arrange the speaker cable passing through the frame and on the insulator. Figure 4-25 Removing the speaker Installing the speaker The following describes the procedure for installing the speaker. (See Figure 4-25.) 1. Set the speaker to the speaker holder. 2. Install the speaker holder on the base assembly and secure it with the following screws. • M2.5×3B S-THIN screw x2 4 -3 6 Portege M200 Maintenance Manual(960 -457)