Toshiba M200-ST2002 Maintenance Manual - Page 181
All Devices, Setup by OS
View all Toshiba M200-ST2002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 181 highlights
3.26 SETUP 3 Tests and Diagnostics 9. Configuration This option lets you set the device configuration. All Devices BIOS sets all devices. Setup by OS Operating system sets devices that it can control. (Default) NOTE: When using installed OS, selecting "Set by OS" is recommended. But, when setting "PC CARD-Controller Mode" to other than " Auto-Selected", select " All Devices". 10. Drives I/O (a) Built-in HDD This option displays setting for hard disk drive. It is for information only and cannot be changed. (b) PC Card This option displays the interruption level of the PC card HDD. The setting cannot be changed. 11. PCI Bus This option displays the interrupt level for the Card Bus in the computer. It is for information only and cannot be changed. 12. PC Card This option displays the PC Card Controller mode. When "Device Config." is set to "All Devices", it can be changed. Auto-Selected Use this setting when OS supports Plug&Play. (Default) Card Bus/16-bit Use this setting when PC card which supports Cared Bus does not work properly in "Auto-Selected". PCIC Compatible Use this setting when 16-bit PC card does not work properly in "Auto-Selected" or "CardBus/16-bit". Portege M200 Maintenance Manual (960-457) 3-79