Toshiba M200-ST2002 Maintenance Manual - Page 219
Bluetooth module, Removing the Bluetooth module
![]() |
View all Toshiba M200-ST2002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 219 highlights
4 Replacement Procedures 4.13 Bluetooth module 4.13 Bluetooth module Removing the Bluetooth module The following describes the procedure for removing the Bluetooth module. (See Figure 422.) 1. Peel off the insulator. 2. After releasing the connector lock, disconnect the flat cable from the connector on the system board and Bluetooth module. 3. Remove the Bluetooth antenna harness from the Bluetooth. Module. 4. Remove the following screws securing Bluetooth module. • M2×4Z BIND screw x1 Bluetooth module M2 x 4Z BIND Flat cable Figure 4-22 Removing the Bluetooth module Installing the Bluetooth module The following describes the procedure for installing the Bluetooth module. (See Figure 422.) 1. Install the Bluetooth module and secure it with following screw. • M2×4Z BIND screw x1 2. Connect the Bluetooth antenna harness to the Bluetooth module. 3. Connect the flat cable to the connector PJ4410 on the system board and Bluetooth module and lock the connectors. 4 -3 0 Portege M200 Maintenance Manual(960 -457)
![](/manual_guide/products/toshiba-m200st2001-maintenance-manual-c5b52ff/219.png)