Toshiba M200-ST2002 Maintenance Manual - Page 230
holder/Battery lock/Latch assembly, Replacement Procedures, Removing the Battery lock
View all Toshiba M200-ST2002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 230 highlights
4.18 Pen holder/Battery lock/Latch assembly 4 Replacement Procedures 4.18.2 Battery lock Removing the Battery lock The following describes the procedure for removing the Battery lock (See Figure 4-29.) 1. Remove the following screws securing the Battery lock. • M2.5×4B FLAT BIND screw x2 2. Remove the Battery lock from the base cover. M2.5x4B FLAT BIND Battery lock Figure 4-29 Removing the Battery lock Install ing the Battery lock The following describes the procedure for installing the Battery lock (See Figure 4-29) 1.Install the Battery lock on the base cover. 2.Secure the Battery lock with the following screws. • M2.5×4B FLAT BIND screw x2 Portege M200 Maintenance Manual (960-457) 4-41
4.18
Pen
holder/Battery lock/Latch assembly
4
Replacement Procedures
Portege M200 Maintenance Manual (960-457)
4-41
4.18.2
Battery lock
Removing the Battery lock
The following describes the procedure for removing the Battery lock (See Figure 4-29.)
1.
Remove the following screws securing the Battery lock.
•
M2.5
×
4B FLAT BIND
screw
x2
2.
Remove the Battery lock from the base cover.
M2.5x4B
FLAT BIND
Battery lock
Figure 4-29
Removing the Battery lock
Installing the Battery lock
The following describes the procedure for installing the Battery lock (See Figure 4-29)
1.
Install the Battery lock on the base cover.
2.
Secure the Battery lock with the following screws.
•
M2.5
×
4B FLAT BIND
screw
x2