Toshiba M200-ST2002 Maintenance Manual - Page 226
Speaker/LED board, Removing the LED board, LED board
View all Toshiba M200-ST2002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 226 highlights
4.16 Speaker/LED board 4 Replacement Procedures 4.16.2 LED board Removing the LED board The following describes the procedure for removing the LED board. (See Figure 4-26.) 1. Remove the following screws securing the LED board and remove LED lens holder. • M2.5×2.8B FLAT BIND screw x1 2. Disconnect the flat cable from the LED board. 3. Remove the LED board from the LED lens holder. Flat cable LED board LED lens holder M2.5x2.8B FLAT BIND Figure 4-26 Removing the LED board Installing the LED board The following describes the procedure for installing the LED board. (See Figure 4-26.) 1. Install the LED board to the LED lens holder. 2. Connect the flat cable to the LED board and system board. 3. Install the LED lens holder to the base assembly and secure it with the following screws. • M2.5×2.8B FLAT BIND screw x1 Portege M200 Maintenance Manual (960-457) 4-37